banner15

Products

Manual pump A-8R manual lubrication pump oil pump machine tool manual oil filling pump manual oil filling pump

Short Description:

All oil pumps are installed on the test bench and tested continuously for 48 hours (oil for 6 seconds at an interval of 15 minutes and 12 seconds at an interval of 30 minutes) to meet the product quality before leaving the factory. If there is oil in the oil tank, it is normal!


Product Detail

Product Tags

Parameter

Model

Output Volume(ml/min)

Max output pressure(kgf/cm2)

Box Volume L

Output size

Form

Weight(kg)

MYA-8L

8

3.5

0.6

M8x1

Resistance type

0.79

MYA-8R

 

Details

Manual pump A-8R manual lubrication pump oil pump machine tool manual oil filling pump manual oil filling pump_4
Manual pump A-8R manual lubrication pump oil pump machine tool manual oil filling pump manual oil filling pump
Manual pump A-8R manual lubrication pump oil pump machine tool manual oil filling pump manual oil filling pump_8
Manual pump A-8R manual lubrication pump oil pump machine tool manual oil filling pump manual oil filling pump_2

Characteristics:

Taiwan lubricating pump CY-1 electromagnetic pump AC220V 110V.
Usage: suitable for small machinery equipment(For example: milling machine, lathe machine and grind machine).

jixie02

1. The voltage has two specifications: 110V and 220V.

jixie02

2. According to the principle of electromagnetic induction, the power loss is low.

jixie02

3. Small volume and less space.

jixie02

4. It can be used continuously for lubrication or cooling.

jixie02

5. It is highly mechanical and can be matched with flow regulating valve to regulate the flow (the discharge flow will change due to the length of oil outlet pipe and oil viscosity).

Installation Essentials:

one

When replacing the oil pump, please clean the oil circuit, residues, iron filings and other wastes first. This not only protects the oil pump, but also makes it durable. If the residue, scrap iron and other wastes are not cleaned before replacement, the oil pump will suck in the residue and scrap iron, which will stop the operation and seriously burn out the oil pump.

two

When a new oil pump is installed for the first time, sometimes the oil pump makes a sound due to the air in the pump core and does not supply oil. At this time, when the power is turned on, manually inject lubricating oil from the inlet of the oil pump to help the air in the oil pump discharge.


  • Previous:
  • Next:

  • Write your message here and send it to us